Beskrivning
Beskrivning av Oxford Stormex Pro Large
The Stormex Pro uniquely combines two covers in one to give the best of both worlds.
The outer is made from a tough, waterproof 600D polyester, which is double-stitched and internally bonded to provide durable protection from the elements and is impervious up to 10,000mm HH.
The tethered inner is made from a soft, Protex Stretch material which slides easily over the bike to provide a snug, dust-free fit whilst protecting against potential knocks and scratches.
The cover is packed with clever additional features to make protecting your motorcycle as easy as possible.
Key Features
? Large top vents have built-in struts which hold them open to ensure maximum breathability
? Chain locks can be employed at both ends, thanks to reinforced eyelets and pockets to keep padlocks off the ground
? Front and rear belly straps hold the cover securely in place
? Reflective details provide 360-degree visibility
? UV resistant materials prevent degradation in sunlight (tested to ASTM154 standards at the Oxford laboratory using our QUV accelerated weather testing machine).
? Waterproof 600D polyester outer, double-stitched and taped (tested in-house using our hydrostatic head machine).
? Soft and stretchy protective lining, uniquely tethered to outer (tested for colour fastness using our perspirometer, incubator and rub test machine).
? Complete with fabric storage bag for when not in use
IMPORTANT: Do not allow this cover to come into contact with hot exhausts, engine parts or sharp objects.
Sizes
The following sizes are approximate, as the covers are shaped:-
? Small – 203cm (Length) X 83cm (Width) X 119cm (Height)
? Medium – 229cm (Length) X 99cm (Width) X 125cm (Height)
? Large – 246cm (Length) X 104cm (Width) X 127cm (Height)
? X-Large – 277cm (Length) X 104cm (Width) X 141cm (Height)
The outer is made from a tough, waterproof 600D polyester, which is double-stitched and internally bonded to provide durable protection from the elements and is impervious up to 10,000mm HH.
The tethered inner is made from a soft, Protex Stretch material which slides easily over the bike to provide a snug, dust-free fit whilst protecting against potential knocks and scratches.
The cover is packed with clever additional features to make protecting your motorcycle as easy as possible.
Key Features
? Large top vents have built-in struts which hold them open to ensure maximum breathability
? Chain locks can be employed at both ends, thanks to reinforced eyelets and pockets to keep padlocks off the ground
? Front and rear belly straps hold the cover securely in place
? Reflective details provide 360-degree visibility
? UV resistant materials prevent degradation in sunlight (tested to ASTM154 standards at the Oxford laboratory using our QUV accelerated weather testing machine).
? Waterproof 600D polyester outer, double-stitched and taped (tested in-house using our hydrostatic head machine).
? Soft and stretchy protective lining, uniquely tethered to outer (tested for colour fastness using our perspirometer, incubator and rub test machine).
? Complete with fabric storage bag for when not in use
IMPORTANT: Do not allow this cover to come into contact with hot exhausts, engine parts or sharp objects.
Sizes
The following sizes are approximate, as the covers are shaped:-
? Small – 203cm (Length) X 83cm (Width) X 119cm (Height)
? Medium – 229cm (Length) X 99cm (Width) X 125cm (Height)
? Large – 246cm (Length) X 104cm (Width) X 127cm (Height)
? X-Large – 277cm (Length) X 104cm (Width) X 141cm (Height)
